Blowing machine

C-5 IIIA
C-5IIIA strecth blow moulding machine is suitable for producing PET.PC.PP and PE,plastic containers and bolles in all shapes,It is widely used to produce the carbonated bottle,mineral water,pesticidal boeele, etc. ● Feeding system carries the preforms by robot automatically. ● Infrared oven adopts the quartz lamp to heat the PET tube. ● Fully automated process with low investment,high efficiency,quick and sate operation,trouble-shooting,maintenance and other benefits.
C-5 IIIA	Main technical specificational 2-cavity	Main technical specificational 4-cavity
Volume of product	0.1-5L	0.1-5L
Hourly product	5L:350pcs/Hr 2L:1000pcs/Hr 0.5-0.6L:1300pcs/Hr 0.1L:1500pcs/Hr	5L:650pcs/Hr 2L:1700/Hr 0.5-0.6L:2300pcs/Hr 0.1L:2500pcs/Hr
Product raw material	PET/PP/PE/PC	PET/PP/PE/PC
Mould plate maxinm dimension	350×350mm	420×350mm
Mould opening stroke	0.1-2L:150mm 5L(1-cavity):250mm	0.1-2L:150MM 5L(1-cabity):250mm
Max mould thickness	0.1-2L:200mm 5L(1-cavity):250mm	0.1-2L:150MM 5L(1-cabity):250mm
Clamping force	150KN	380KN
Air pressure for working	0.8-1.25MPa	0.8-1.25MPa
Air pressure for blowing	1.5-4.0MPa	1.5-4.0MPa
Temperature control	7 Section	7 Section
Length of perform	50-220mm	50-220mm
Inner diameter of perform tube	￠15-100mm	￠15-100mm
Stretching bar diameter	￠8-50mm	￠8-50mm
Quantity of heating rotation	34-54pcs	34-54pcs
Length of bottle	340mm	340mm
Diameter of bottle	￠60-180mm	￠60-180mm
power	15KW	23KW
Weight	1600KGS	2200KGS
Main machine dimensions(L×W×H)	210×140×225mm	300×155×225cm
Weight of conveyer	300KGs	300KGS
Conveyer dimensions	180×110×225mm	180×110×225mm
Electric voltage/Frequency	220/380V/50Hz	220/380V/50Hz
Compressor low/high pressure	0.6/3.0MPa 1set 1/1.25MPa 1set	0.85/3.0MPa 1set 1.5 /1.25MPa 1set
Air drying machine	1/30 2pcs	1/30 2pcs

Send mail to oxj@mail.nbptt.zj.cn , or send fax to 86-574-87125949 with questions or comments about this web site, also inquiry for the listed products. Last modified: 10.16.2001